5.0SMDJ11A datasheet pdf

FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01% • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1μA above 10V • High temperature soldering: 250°C/10 seconds at terminals • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O MECHANICAL DATA Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) Dimensions in inches and (millimeters) except Bidirectional Standard Packaging: 1 6mm tape (EIA STD RS-481) Weight: 0.007 ounces, 0.021 grams) Ratings at 25°C ambient temperature unless otherwise specified. RATINGSYMBOLVALUEUNITS Peak Pulse Power Dissipation on 10/1000 μs waveform (NOTE 1, 2, Fig.1) I PPM SEE TABLE 1Amps Superimposed on Rated Load, (JEDEC Method)(Note2, 3) Operatings and Storage Temperature RangeT J , T STG -55 +150°C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 5000 Watt Peak Pulse Power MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 5.0 SMDJ SERIES MAXIMUM RATINGS AND CHARACTERISTICS Electrical characteristics apply in both directions. For Bidirectional use C or CA Suffix for types 5.0SMDJ5.0 thru types 5.0SMDJ170 (e.g. 5.0SMDJ5.0C, 5.0SMDJ170CA) DEVICES FOR BIPOLAR APPLICATIONS P PPM Minimum 5000Watts Peak Pulse Current of on 10/1000 μs waveform (Note 1,Fig 3) I FSM 400Amps Peak Forward Surge Current, 8.3ms Single Half Sine-wave

Features

• • For surface mounted applications in order to
• • Low profile package
• • Built-in strain relief
• • Glass passivated junction
• • Low inductance
• • Excellent clamping capability
• • Repetition rate (duty cycle):0.01%
• • Fast response time: typically less than
• 1.0 ps from 0 volts to BV for unidirectional types
• • Typical IR less than 1μA above 10V
• • High temperature soldering:
• • Plastic package has Underwriters Laboratory
• -55 +150°C
• 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
• 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
• 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
• 5.0 SMDJ SERIES