12KP datasheet pdf

Transient Voltage Suppression Diodes Trustworthy electronic circuit protection expert12000W > 12KP Series www.yint.com.cnRev:19.31 12KP Series Features ●12000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.05% ●Fast response time ●Typical IR less than 2μA above 30V. ●High Temperature soldering guaranteed: 265°C/10 seconds/.375′′,(9.5mm) lead length, 5lbs (2.3kg) tension ●Plastic package has underwriters laboratory flammability 94V-0 ●Meets MSL level 1, per J-STD-020. ●Glass passivated junction ●Low incremental surge resistance ●Excellent clamping capability Mechanical Data ●Case: Moulded plastic over glass passivated junction ●Terminal: Plated Axial leads, solderable per MIL-STD-750, Method 2026 ●Polarity: Color band denotes cathode except bi-directional models ●Mounting Position: Any ●Weight: 2.30g P600 Maximum Ratings (TA=25 °C unless otherwise noted) ParameterSymbolValueUnit Peak pulse power dissipation at 10/1000μs waveform(Note1, Fig.1)P PPM Minimum 12000Watts Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)I PPM See TableAmps Steady state power dissipation at TL=75°C(Fig.5)P M(AV) 8.0Watts Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note2, Fig.6) I FSM 400Amps Operating junction and Storage Temperature Range.T J ,T STG -55 to +175 °C Typical thermal resistance junction to leadR θJL 8 °C/W Typical thermal resistance junction to ambientR θJA 40°C/W Note： 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°Cper Fig.2. 2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. Electrical Characteristics(TA = 25 °C unless otherwise noted)

Features

• 8.0Watts
• -55 to +175
• 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°Cper Fig.2.
• 2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.